Content for id "contentinnertoppadding" Goes Here

Clean Coal Home Page

About Clean Coal

Clean Coal Boiler Benefits

Clean Coal Financial Benefits

Clean Coal Glossary

Clean Coal Technology

Clean Coal Environmental Benefits

Purchase Clean Coal Technology CC-88

Sitemap

Press Releases

 

 

Clean Coal Benefits the Boiler

Equipment Benefits

Furnace and Boiler Equipment Operation Cost Reductions

Clean coal technologies benefit the boiler. Our Coal Catalyst CC-88 will remove slagging and maintain a clean operating furnace system. To remove accumulated slag, a higher dose of CC-88 should be used initially for a period of 45 to 60 days. At the end of this period, the clean coal catalyst can then be reduced to its nominal designed feed rate and the slag will not form on heat transfer surfaces again. The coating of slag and hard carbon deposits inside boiler tubes will become a light friable material that is easily removed by compressed air during soot blowing instead of manual removal of hard carbon deposits.

Slagging of boiler tubes is very common for some types of coal. When this occurs, costly downtime is necessary to clean out the boiler components. In some instances, additional power needs to be purchased by a user to meet sufficient power requirements. With the use of CC-88 clean coal combustion catalyst, the cost incurred from added shut downs due to slagging and related maintenance can be eliminated as well as the cost of buying power to replace power lost during shut downs.

CC-88 clean coal combustion catalyst will reduce the amount of SO3 emissions and as a result greatly reduce cold end corrosion in equipment downstream of the boiler system such as the air pre-heater, particulate collection device, fans and breechings. Over the years of continuous operation, saving considerable costs for replacement of the older deficient equipment of rebuilding due to age related to equipment failure.